Powering Your Writer with the USB Cable
Written by Justin Sieger
Updated at December 15th, 2021
Luminex II
When the Luminex II is connected to your computer for realtime with the USB Type-C cable, the main battery continues to power the writing machine. In most situations, the USB port can power the Luminex II and may charge the battery when the main battery is not fully charged. When the main battery becomes low, a low battery message displays on the Luminex II, but all features continue to operate. The USB port provides power to run all the Luminex II components except Bluetooth communications. While being powered by the USB Type-C port, the Luminex II tilting screen displays at about half of the Backlight brightness setting. To use the USB Type-C cable, you must install the Luminex II USB driver on your computer.
DeleteLuminex & Luminex CSE
When the Luminex is connected to your computer for realtime with the micro USB cable, the main battery continues to power the writing machine. In most situations, the USB port can power the Luminex and may charge the battery when the main battery is not fully charged. When the main battery becomes low, low battery message displays on the Luminex, but all features continue to operate. The USB port provides power to run all the Luminex components except Bluetooth communications. While being powered by the micro USB port, the Luminex tilting screen displays at about half of the Backlight brightness setting. To use the micro USB cable, you must install the Luminex USB driver on your computer.
DeleteDiamante & Wave
When the Diamante is connected to your computer for realtime via a USB cable, the main battery continues to power the writing machine. In most situations, the USB port can power the Diamante when the main battery is not charged. When the main battery becomes low, a low battery message displays on the Diamante, but all features continue to operate. The USB port provides power to run all the Diamante components except WIFI and Bluetooth communications. When powered by the USB port, the Diamante Tilting screen displays at about half of the Backlight brightness setting. To use the USB cable, you must install the Diamante USB driver on your computer.
Delete